24AWG UTP 350MHZ CAT5E ETHERNET CABLE
* Specification: 4P
* Rated Temperature: -40°C ~ + 75°C
* Unshielded twisted pairs
* Conductor: 26AWG or 24AWG Stranding or Solid Bare copper
* Insulation: HD—PE
* Unrip rope: optional
* Jacket: PVC or LSNH
* Impedance: 100±15% O at 1 ~100MHz
* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801
* Print Legend: CM or CMR
Cable Assembly Specification:
PVC or LSNH
PVC or LSNH
Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.
Those particular cables still must adhere to 328 feet (100M) in length that allows for 5M of end patch cable that needs to be at each end. However, the specification for Cat5e add some very special specifications to far end crosstalk.
Cross talk signals that are transmitted on a Cat5e cables are defined as some sort of undesired effect happening to yet another circuit or channel than the one being used in that particular cable.
Ordinarily cross talk is often caused by undesired conductive coupling, inductive, or capacitive information from one circuit or channel to yet another. This is why the Cat5e cables systems use the twisted pairs when making analog connctions.
Also, the signals may well be converted to digital form, thus rendering the signals to become much less susceptible to crosstalk. The simple description of crosstalk is when one signal affects another nearby signal.