Exhibition

Bare Copper Conductor Cat6 UTP 23AWG Cable


Bare Copper Conductor Cat6 UTP 23AWG Cable



Specialization: 

 

* Unshielded twisted pairs

* AWG: 24/26/28AWG  Optional

* Conductor: Stranding or Solid CCAM/CCA/CCU/CU/ Bare copper available

* Insulation: HD—PE

* Unrip rope: optional

* Jacket: PVC or LSNH

* Impedance: 100±15% O at 1 ~100MHz

* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801

* Print Legend: CM or CMR

 

* Specification: 4P

 

* Rated Temperature: -40°C ~ + 75°C

 

 

 Diameter of Cable

 

Conductor

Insulation

Core Number

Jacket

AWG

Specification

mm

Material

Thickness

(NOM.mm)

Material

Thickness

(NOM.mm)

 OD

(NOM.mm)




24

1/0.511

HD-PE

0.18

4P

PVC or LSNH

0.55

5.4


26

1/0.404

HD-PE

0.18

4P

PVC or LSNH

0.55

5.0


 

 

Scope Application:

 

Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.



Solid Cat6 Ethernet cable is the most popular cable for long, stationary runs, such as in a home or office network. While solid conductor cable is not as flexible as those with stranded conductors, it provides better performance over longer distances. This bulk cable in an easy-pull box can be measured and cut to exact distances, then terminated to a connector, jack, or patch panel. Cat6 is certified for gigabit Ethernet.

Features:

 


       Function of the cable, what type of device will run on this cable. For traditional business telephones CAT5e is all that is needed. There would be no advantage to using CAT6 with a phone. In regards to network equipment the thing to keep in mind is if you installed CAT6 cabling are you truly gaining anything? We know that CAT6 can transfer data at higher speeds but the real question is will the network equipment send the data at speeds about 1000mbps. If the answer is no there would be no benefit from using CAT6.