Features:
* Rated Temperature: -40°C ~ + 75°C
* Unshielded twisted pairs
* Conductor: 23AWG or 24AWG Stranding or Solid Bare copper
* Insulation: HDPE
* Jacket: PVC or LSNH
* Inner Jacket: HDPE
* Impedance: 100±15% O at 1 ~250MHz
* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801
* Print Legend: CM or CMR
Cable Assembly Specification:
Conductor | Insulation | Filler | Outer Jacket | Jacket | ||||||||||
AWG | Specification mm | Material | Thickness (NOM.mm) | Material | Thickness (NOM.mm) | OD (NOM.mm) | Material | Thickness (NOM.mm) | OD (NOM.mm) | |||||
24 | 1/0.511 | HD-PE | 0.25 | PE Cross | PE | 0.60 | 6.8 | PVC | 0.60 | 70 | ||||
23 | 1/0.573 | HD-PE | 0.25 | PE Cross | PE | 0.60 | 7.2 | PVC | 0.60 | 7.5 | ||||
Scope Application:
Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring.
The general difference between category 5e and category 6 is in the transmission performance, and extension of the available bandwidth from 100 MHz for category 5e to 250 MHz for category 6. This includes better insertion loss, near end crosstalk, return loss, and equal level far end crosstalk. These improvements provide a higher signal-to-noise ratio, allowing higher reliability for current applications and higher data rates for future applications.