ShenZhen Network Cable Manufacturer UTP Cat5e Network Cable
* Specification: 4P
* Rated Temperature: -40°C ~ + 75°C
* Unshielded twisted pairs
* Conductor: 26AWG or 24AWG Stranding or Solid Bare copper
* Insulation: HD—PE
* Unrip rope: optional
* Jacket: PVC or LSNH
* Impedance: 100±15% O at 1 ~100MHz
* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801
* Print Legend: CM or CMR
Cable Assembly Specification:
PVC or LSNH
PVC or LSNH
Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.
Cat5e is distinguished from the original Cat5 standard primarily in its performance requirements. There are several differences in the following aspects:
Network support – Cat5 cable will support 10/100 Ethernet (i.e. Ethernet and Fast Ethernet) while Cat5e cable will support Ethernet, Fast Ethernet, and Gigabit Ethernet. Cat5e cable is completely backwards compatible, and can be used in any application in which you would normally use Cat5 cable.
Less crosstalk – Crosstalk is the electrical interference that results when one wire’s signal affects another wire’s signal. In this respect, Cat5e cable works better than Cat5 cable that crosstalk has been greatly reduced.
Bandwidth – This is directly related to network support, in the sense that the bandwidth is the information-carrying capacity of a system. The greater the bandwidth, the greater the information-carrying capacity in a given period of time. Cat5e cable is rated at 100 MHz, and it is this increased bandwidth (compared to Cat5 cable) that allows it to support Gigabit Ethernet.