Lan Cable

Cat5e RJ45 BC FTP Patch Cord Cable, 3M

Cat5e RJ45 BC FTP Patch Cord Cable, 3M
Product Details

Cat5e Rj45 BC FTP Patch Cord Cable, 3M

Cat5e have small attenuation, little crosstalk, higher ratio of attenuation to crosstalk (ACR) and Structural Return Loss, and smaller delay error, and their performance is greatly improved. The super 5 class line is mainly used for gigabit Ethernet (1000Mbps).



*Type: Solid/Stranded Optional

*Plug: 8P8C RJ45 Connector With Gold Plated 

*Conductor: CCA/CU/Bare Copper ect

*Out Sheath:  PVC/ROHS/LSZH jacket optional

*Color:  Grey, Red, Yellow, Green, Blue, ect.

*Length: 1M, 2M, 3M, 5M, 10M....

Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801 


Diameter Optional:


Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, 

As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.

Packing Details:

Q1: can the connection of the cable (twisted pair) be screwed together directly? 
Answer: don't screw them together. It is easy to make a bad connection when two joints are screwed together directly, which leads to excessive contact resistance and affects the transmission effect. It can't even transmit. 
The correct way is to connect with a soldering iron soldering together, with heat shrinkable sleeve wrap, to prevent short circuit.


Q 2: what combination of signals can a twisted pair transmit? 
Answer: a wire generally has four pairs of twisted pair, can transmit 4 video; In short, one pair can transmit one signal, four pairs can transmit four signals, and large logarithmic twisted pair can transmit more signals.


Q3Can twisted pair power supply? 
Answer: yes. When using twisted pair power transmission, to ensure that the ancient power supply in line with the requirements of the equipment. The working current of each twisted-pair transmitter is 50mA, and the internal resistance of the twisted-pair is 10/100m (to be measured in actual use). If the transmitted power supply is 12VDC, to ensure the normal use of the equipment, you have to transfer the power supply within 200 meters.