Cat6 FTP CCA Solid Ethernet 1000FT
Cat6: the transmission frequency of this type of cable is 1MHz ~ 250MHz, and the six types of cabling system should have a large amount of allowance at 200MHz when the comprehensive attenuation crosscut ratio (ps-acr), which provides twice as much bandwidth as the super five types. The transmission performance of the six types of cabling is much higher than that of the super five standards, and it is most suitable for the application with the transmission rate higher than 1Gbps. One important difference between the six classes and the super five classes is that they improve the performance in crosstalk and return loss. For the new generation of full-duplex high-speed network applications, excellent return loss performance is extremely important. The basic link model is cancelled in the six standards. The wiring standard adopts star topology structure, and the required wiring distance is: the length of permanent link cannot exceed 90m, and the channel length cannot exceed 100m. Currently, TWISTED PAIR can be divided into the unshielded TWISTED PAIR (UTP = UNSHILDED TWISTED PAIR) and shielding twisted-pair (STP = SHIELDED TWISTED PAIR).
Conductor: Bare Copper/CU/CCA/CCAG Material Optional
AWG: 23 (0.573±0.01MM)
Type: Solid/Stranded optional
Drain Wire: CCA/CU/BC/TC Optional
Rip Cord: High Quality Cotton
Sheath: PVC Jacket
Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.